300-425 Question 265
Single answerAn enterprise network administrator is configuring a Cisco Wireless LAN Controller (WLC) to support multiple SSIDs across different VLANs. The administrator wants to ensure that each SSID is assigned to its respective VLAN while maintaining network segmentation. Which feature on the WLC must the administrator configure to achieve this?
- A
Dynamic Interfaces
- B
FlexConnect Groups
- C
Mobility Groups
- D
AP Groups
Show answer and explanation
Correct answer: A
Explanation
To map SSIDs to VLANs on a Cisco WLC, Dynamic Interfaces must be configured. Dynamic Interfaces enable the administrator to assign each SSID to a specific VLAN, ensuring traffic from each SSID is segmented and routed correctly. This is a fundamental feature of WLC configuration for supporting network segmentation.
- A. Correct.
Dynamic Interfaces are used on a WLC to map SSIDs to specific VLANs, allowing for network segmentation and proper traffic routing. This is the correct feature for this scenario.
- B. Incorrect.
FlexConnect Groups are used for managing APs in FlexConnect mode, typically in remote branch deployments, but they are not used to map SSIDs to VLANs.
- C. Incorrect.
Mobility Groups are used to enable seamless client roaming between controllers, but they do not influence SSID-to-VLAN mapping.
- D. Incorrect.
AP Groups allow for specific WLAN settings to be applied to a group of APs, but they do not handle SSID-to-VLAN mapping directly.