300-435 Question 97
Select 3You are tasked with configuring a model-driven telemetry subscription on an IOS XE device using CLI. The telemetry data must be sent to a collector at 192.168.1.100 on port 50051 using gRPC. Which of the following steps are required to correctly configure this subscription?
- A
Define a telemetry subscription with a unique subscription ID.
- B
Specify the sensor path to define the telemetry data to collect.
- C
Configure the destination group with the collector details, including IP address and port.
- D
Enable SNMP traps to forward telemetry data to the collector.
- E
Set the encoding format to JSON for telemetry data transmission.
Show answer and explanation
Correct answers: A, B, C
Explanation
To configure model-driven telemetry on an IOS XE device, you must define a subscription ID, specify the sensor path for the telemetry data, and configure the destination group with the collector's IP and port. SNMP traps are not relevant for telemetry, and the encoding format is optional unless explicitly required by the collector or use case.
- A. Correct.
Correct. Each telemetry subscription requires a unique subscription ID to distinguish it from others.
- B. Correct.
Correct. The sensor path defines the specific data that the telemetry subscription will collect.
- C. Correct.
Correct. The destination group must be configured to specify the collector's IP address and port for data transmission.
- D. Incorrect.
Incorrect. SNMP traps are not used for model-driven telemetry; telemetry data uses protocols like gRPC or NETCONF.
- E. Incorrect.
Incorrect. While JSON is a valid encoding format, it is not mandatory in this scenario unless specifically required. You can use other formats like GPB (Google Protocol Buffers).