2V0-41.24 Question 100
Select 2An organization is deploying VMware NSX in their environment and needs to configure an NSX Edge Gateway to manage traffic between their on-premises private network and public cloud services. They are unsure about the types of gateway interfaces they should configure to meet the following requirements:
- Allow traffic between their internal network and external services.
- Enable routing between multiple internal logical segments.
Which combination of NSX Edge Gateway interface types should they configure to meet these requirements?
- A
Uplink interface
- B
Internal interface
- C
Loopback interface
- D
Service interface
- E
Tier-0 to Tier-1 transit interface
Show answer and explanation
Correct answers: A, B
Explanation
To fulfill the requirements, the organization needs to configure an uplink interface on the NSX Edge Gateway to handle traffic between their internal network and external services. Additionally, they need an internal interface to enable routing between multiple internal logical segments. Other interface types, such as loopback, service, and Tier-0 to Tier-1 transit interfaces, do not address these specific needs.
- A. Correct.
The uplink interface is used to connect the NSX Edge Gateway to the external network, allowing traffic to flow between the internal network and external services. This meets the requirement for external connectivity.
- B. Correct.
The internal interface is used to connect the NSX Edge Gateway to internal logical segments, enabling routing between multiple internal network segments. This meets the requirement for routing between internal segments.
- C. Incorrect.
The loopback interface is typically used for management or monitoring purposes, not for connecting to external networks or routing traffic between internal segments. It is not applicable to this scenario.
- D. Incorrect.
The service interface is used for specific service-related networking configurations, such as load balancers or VPNs, and does not address the requirements for general traffic routing in this scenario.
- E. Incorrect.
The Tier-0 to Tier-1 transit interface is used for communication between Tier-0 and Tier-1 gateways in a multi-tiered NSX deployment, which is not directly relevant to the specified requirements in this scenario.