2V0-41.24 Question 303
Select 2An administrator is tasked with configuring a Tier-1 Gateway in an NSX-T environment to provide east-west traffic routing for workloads in a specific segment. The Tier-1 Gateway also needs to connect to a Tier-0 Gateway for north-south traffic. During the configuration, which of the following steps must the administrator perform to ensure proper functionality?
- A
Enable route advertisement for connected segments on the Tier-1 Gateway.
- B
Configure a default gateway on all segments connected to the Tier-1 Gateway.
- C
Link the Tier-1 Gateway to an appropriate Tier-0 Gateway.
- D
Enable the high-availability mode on the Tier-1 Gateway.
- E
Assign a Tier-1 Gateway uplink interface to the appropriate VLAN segment.
Show answer and explanation
Correct answers: A, C
Explanation
To configure a Tier-1 Gateway, route advertisement for connected segments must be enabled to ensure segment routes are propagated to the Tier-0 Gateway. Additionally, linking the Tier-1 Gateway to a Tier-0 Gateway is required to provide north-south connectivity. Other steps, such as enabling high-availability or configuring default gateways on segments, are optional or not relevant for this scenario.
- A. Correct.
Correct. Route advertisement for connected segments on the Tier-1 Gateway is necessary to propagate routes to the Tier-0 Gateway and enable connectivity to external networks.
- B. Incorrect.
Incorrect. Configuring a default gateway on all segments connected to the Tier-1 Gateway is not required. The Tier-1 Gateway itself handles routing for the connected segments.
- C. Correct.
Correct. Linking the Tier-1 Gateway to a Tier-0 Gateway is essential for establishing north-south connectivity.
- D. Incorrect.
Incorrect. Enabling high-availability mode on the Tier-1 Gateway is optional and depends on the deployment requirements. It is not mandatory for basic functionality.
- E. Incorrect.
Incorrect. Assigning a Tier-1 Gateway uplink interface to a VLAN segment is not a standard configuration step for Tier-1 Gateways. This step is typically performed on the Tier-0 Gateway.