2V0-41.24 exam dumps

2V0-41.24 practice question 342 of 462

VMware Certified Professional - Network Virtualization 2024. Associate level, VMware. Free question with the correct answer and a full explanation.

2V0-41.24 Question 342

Select 3

An organization has deployed NSX-T Data Center with a Tier-0 gateway configured to provide external connectivity for workloads. After verifying the network topology in the NSX Manager, the administrator notices that the Tier-0 gateway is in a 'Down' state. Which of the following steps should the administrator take to validate and resolve the Tier-0 gateway configuration?

  1. A

    Ensure that the Tier-0 gateway is linked to a Transport Zone.

  2. B

    Verify that the Tier-0 gateway has an active Edge Node assigned to it.

  3. C

    Check if the Tier-0 gateway has an uplink with a valid IP address and VLAN configuration.

  4. D

    Ensure that the Tier-0 gateway is directly connected to a Tier-1 gateway.

  5. E

    Verify that the Tier-0 gateway has a route to the external network.

Show answer and explanation

Correct answers: B, C, E

Explanation

To validate and resolve a Tier-0 gateway in a 'Down' state, administrators should ensure the Tier-0 gateway has an active Edge Node assignment, valid uplink configuration (IP address and VLAN), and appropriate routes to the external network. These checks ensure that the Tier-0 gateway is fully operational and capable of providing connectivity as intended.

  • A. Incorrect.

    The Tier-0 gateway does not need to be directly linked to a Transport Zone. Instead, it uses the Transport Zones defined for Edge Nodes or uplinks. This is not a direct validation step for a Tier-0 gateway configuration.

  • B. Correct.

    An active Edge Node is required for the Tier-0 gateway to function properly. Without this, the Tier-0 gateway will not establish data path connectivity.

  • C. Correct.

    A valid uplink configuration, including IP address and VLAN settings, is essential for the Tier-0 gateway to establish external connectivity.

  • D. Incorrect.

    Tier-0 gateways are not required to be directly connected to Tier-1 gateways. They can operate independently to provide external connectivity.

  • E. Correct.

    Routes are necessary for the Tier-0 gateway to communicate with the external network. Without a route, even if the gateway is operational, it cannot reach the external network.

Timed practice exam

Take a 2V0-41.24 practice test under exam conditions

55 questions in 135 minutes, drawn from this bank, with a score report and a per-question review when you finish.

Start timed exam