2V0-41.24 Question 408
Single answerYou are a network administrator managing a VMware NSX environment for your organization. During a routine audit, you notice that system logs are not being forwarded to your centralized syslog server. After verifying that the syslog server is reachable, you decide to configure the NSX Manager to forward logs to this server. Which action should you take to correctly configure the syslog settings?
- A
Navigate to the Networking tab in the NSX Manager UI, select the appropriate transport zone, and configure syslog settings.
- B
Access the NSX Manager UI, go to the System > Fabric > Nodes section, select NSX Manager, and configure the syslog server details.
- C
Log in to the ESXi host where the NSX Manager appliance is running, and manually update the syslog configuration file.
- D
Use the VMware vSphere Client, select the NSX Manager VM, and configure the syslog settings under the VM's advanced options.
Show answer and explanation
Correct answer: B
Explanation
To forward system logs to a centralized syslog server, NSX Manager's syslog settings must be configured via the NSX Manager UI under System > Fabric > Nodes. This ensures that logs from NSX Manager are forwarded to the specified syslog server for centralized log management and auditing. Configuration at the transport zone, ESXi host, or VM level is not relevant for NSX Manager's syslog forwarding.
- A. Incorrect.
Syslog settings cannot be configured under the Networking tab or transport zone configuration. This option is incorrect because syslog settings are specific to the NSX Manager itself and not tied to transport zones.
- B. Correct.
This is the correct option. Syslog settings for NSX Manager are configured in the NSX Manager UI under System > Fabric > Nodes. This is where you can specify the syslog server IP or hostname, port, and protocol.
- C. Incorrect.
This option is incorrect because syslog settings for NSX Manager are not configured directly on the underlying ESXi host. The NSX Manager UI must be used for this configuration.
- D. Incorrect.
Syslog settings cannot be configured from the VMware vSphere Client or the VM's advanced options. NSX Manager syslog settings must be set via the NSX Manager UI.