CiscoProfessional level300-435Page 3 of 4

300-435 exam dumps: questions 201 to 300 of 321

Page 3 of the free 300-435 question bank for the Automating Cisco Enterprise Solutions exam. Questions 201 to 300 are listed below, the first 5 in full with answers and explanations. Back to page 1 for the exam overview and FAQ.

Question bank last updated February 2025

Start timed practice exam Questions 201 to 300

Free 300-435 practice questions

Questions 201 to 205 of 321

Pick an answer before you open the explanation. Each question also has its own page with a permalink.

300-435 Question 201

Single answer

You are automating the deployment of a new branch office using Cisco DNAC Site APIs. The branch office requires a hierarchical site structure to be created with the following levels: 'Global > Region1 > Branch1'. After creating the branch structure, you need to retrieve the Site ID for 'Branch1' to assign it to network devices. Which API endpoint should you use to retrieve the Site ID for 'Branch1'?

A
/dna/intent/api/v1/site
B
/dna/intent/api/v1/site-health
C
/dna/intent/api/v1/topology/site-topology
D
/dna/intent/api/v1/network-device

Show answer and explanation

Correct answer: A

Explanation

To retrieve the Site ID for 'Branch1', the correct API endpoint is '/dna/intent/api/v1/site'. This endpoint provides detailed site information, including the hierarchical structure and Site IDs, which are necessary for assigning devices to specific sites. Other endpoints mentioned are used for different purposes, such as monitoring site health, retrieving topology information, or managing network devices.

A. Correct.
This is the correct endpoint to retrieve information about sites, including their Site IDs. It provides the necessary hierarchical site details.
B. Incorrect.
This endpoint is used for monitoring site health and performance metrics, not for retrieving site details or Site IDs.
C. Incorrect.
This endpoint is used for retrieving site topology information but does not provide detailed site-level information or Site IDs.
D. Incorrect.
This endpoint is used for retrieving information about network devices, not for retrieving site details or Site IDs.

300-435 Question 202

Select 2

You are automating the deployment of a new branch site using Cisco DNA Center's Site APIs. The new site requires specific attributes, including a hierarchy of 'Global > Region > Branch', and must have time zone and address details configured. Which steps should you include in your automation workflow to successfully create the site?

A
Use the 'Create Site' API to define the site hierarchy and include time zone and address details in the payload.
B
Use the 'Site Health' API to validate the status of the newly created site.
C
First, use the 'Create Site' API to define the site hierarchy, then use the 'Update Site' API to add time zone and address details.
D
Use the 'Get Site' API to retrieve and verify existing site details before creating a new one.
E
Use the 'Delete Site' API to remove any conflicting site configurations before creating the new site.

Show answer and explanation

Correct answers: A, C

Explanation

To automate the creation of a new branch site using Cisco DNA Center's Site APIs, you can either include all required details (hierarchy, time zone, and address) in the initial 'Create Site' API payload or use a two-step process where the site hierarchy is created first using 'Create Site', followed by adding additional details like time zone and address using the 'Update Site' API. Both approaches are valid, depending on the API payload and workflow design.

A. Correct.
Correct. The 'Create Site' API can be used to define the site hierarchy and include necessary details like time zone and address in a single step if the payload is properly structured.
B. Incorrect.
Incorrect. The 'Site Health' API is used to check the operational status of a site, not for creating or configuring it.
C. Correct.
Correct. A two-step process using 'Create Site' followed by 'Update Site' ensures the site is created with the hierarchy first, and then additional details like time zone and address can be added.
D. Incorrect.
Incorrect. The 'Get Site' API retrieves information about existing sites but is not used in the creation process.
E. Incorrect.
Incorrect. The 'Delete Site' API is not required unless there is a specific conflict with an existing site, which is not indicated in this scenario.

300-435 Question 203

Single answer

You are working with Cisco DNA Center and need to retrieve a list of site hierarchy details for a specific region in your network, using Site APIs. Which API endpoint should you use to achieve this?

A
/dna/intent/api/v1/site
B
/dna/intent/api/v1/topology
C
/dna/intent/api/v1/site-health
D
/dna/intent/api/v1/network-device

Show answer and explanation

Correct answer: A

Explanation

The Site APIs in Cisco DNA Center are used to manage and retrieve information about site hierarchies. The endpoint '/dna/intent/api/v1/site' specifically allows you to retrieve details about site hierarchies, including regions, buildings, and floor plans. Other endpoints like '/dna/intent/api/v1/topology' or '/dna/intent/api/v1/site-health' are focused on different functionalities such as network topology or health metrics, making them unsuitable for this task.

A. Correct.
This is the correct API endpoint for retrieving site hierarchy details, such as regions, buildings, and floor plans, in Cisco DNA Center.
B. Incorrect.
This endpoint is used for retrieving network topology details such as links and nodes, not site hierarchy information.
C. Incorrect.
This endpoint provides health-related information about sites, such as issue counts and devices' health status, but not detailed site hierarchy information.
D. Incorrect.
This endpoint is used for retrieving information about network devices, including their configuration and status, but not site hierarchy details.

300-435 Question 204

Single answer

You are automating your Cisco SD-Access (SDA) deployment for a large enterprise using the Cisco DNA Center API. Your goal is to retrieve details about all virtual networks (VN) configured in your SDA fabric to verify the segmentation strategy. Which Cisco DNA Center API endpoint should you use to achieve this?

A
/dna/intent/api/v1/site
B
/dna/intent/api/v1/business/sda/virtual-network
C
/dna/intent/api/v1/network-device
D
/dna/intent/api/v1/topology/l3

Show answer and explanation

Correct answer: B

Explanation

To retrieve details about all virtual networks (VNs) in an SDA fabric, you must use the '/dna/intent/api/v1/business/sda/virtual-network' endpoint. This API endpoint is specifically designed for extracting VN configurations and associated details, which are crucial for verifying segmentation strategies in Cisco SD-Access deployments.

A. Incorrect.
This endpoint is used for retrieving information about sites in Cisco DNA Center and is unrelated to SDA virtual networks.
B. Correct.
This is the correct endpoint for retrieving details about virtual networks (VNs) in the SDA fabric, allowing you to verify segmentation.
C. Incorrect.
This endpoint retrieves information about network devices in Cisco DNA Center, but it does not provide virtual network details.
D. Incorrect.
This endpoint retrieves Layer 3 topology information, which is unrelated to SDA virtual networks.

300-435 Question 205

Single answer

A network engineer is using Cisco DNA Center's Software-Defined Access (SDA) APIs to automate the provisioning of a new fabric site. The engineer wants to retrieve the list of all existing virtual networks (VN) in the fabric. Which endpoint should the engineer use to achieve this?

A
GET /dna/intent/api/v1/virtual-network
B
POST /dna/intent/api/v1/virtual-network
C
GET /dna/intent/api/v1/site
D
GET /dna/system/api/v1/auth/token

Show answer and explanation

Correct answer: A

Explanation

The GET /dna/intent/api/v1/virtual-network endpoint is specifically designed to retrieve a list of all virtual networks (VNs) in the fabric. Understanding the correct usage of SDA APIs is crucial for automating and managing Cisco SDA environments effectively.

A. Correct.
This is the correct API endpoint to retrieve the list of all virtual networks (VNs) in a fabric using SDA APIs.
B. Incorrect.
POST /dna/intent/api/v1/virtual-network is used to create a new virtual network, not to retrieve the existing ones.
C. Incorrect.
GET /dna/intent/api/v1/site is used to retrieve site hierarchy information, which is unrelated to virtual networks.
D. Incorrect.
GET /dna/system/api/v1/auth/token is used to generate an authentication token to interact with Cisco DNA Center APIs, but it does not retrieve virtual network information.

Timed practice exam

Take a 300-435 practice test under exam conditions

75 questions in 120 minutes, drawn from this bank, with a score report and a per-question review when you finish.

Start timed exam

300-435 practice questions 201 to 300 of 321

Every question has a page with the answer and explanation. Numbers are stable, so you can bookmark or share them. The bank is split into 4 pages of up to 100 questions.